'craftmans keyless pad'

honeybunny31May 22, 2006

Trying to program the keyless pad. I have a red button, and it says to press the purple "learn" button. I do not have this button, any clue on how I can program?. I have tried the red button, that works for the transmitters but not for the keyless pad. Any help would be apprechated..

Thanks much,

Honey

Thank you for reporting this comment. Undo
Don_

Try this. On the rear of your opener near where all those white wires go you will find a button. Press and immediately release it and then walk over to your keypad and key in your 4 digit 'secret code' and press enter. Should get you going Honey.

    Bookmark   May 22, 2006 at 6:56PM
Thank you for reporting this comment. Undo
honeybunny31

I see where the white wires go(under the screws) but there is no button. Any clue? I have the craftsman 1/2hp.

Thanks for your response.

Honey

    Bookmark   May 22, 2006 at 7:11PM
Thank you for reporting this comment. Undo
Don_

Maybe you have an older opener that has a row of very small switches just to the left of those white wires. Post your model number. It looks like this: 139.XXXXXX. Are you trying to program a wireless keypad and did it come with the opener or is it something you recently purchased?

    Bookmark   May 23, 2006 at 1:31PM
Thank you for reporting this comment. Undo
honeybunny31

It is about 7 years old. I am trying to replace the old key pad with a new one. I have 2 sets of #'s 13282052-1 (located up by the wires) and 132b2104-1 (located on a little box on the back also but on the left side. Thank you so much for your time.

Honey

    Bookmark   May 23, 2006 at 4:29PM
Thank you for reporting this comment. Undo
Don_

Those aren't the numbers I was looking for but is the new keypad also a Craftsman? If the red button you first mentioned is on the rear of your opener that is the one you should be using.

    Bookmark   May 23, 2006 at 5:23PM
Sign Up to comment
More Discussions
garage door remote opens but wont shut door
I have a 10 year old Craftsman garage door opener model...
Junky
Need Help with My SnowBlower
I just recently bought a Craftsman 24" snow thrower,...
bdouble
Light on my garage door opener won't turn off
The light on my old Genie Medallion Series garage door...
liviey
Craftsman Garage Opener Clicks only and LED blinking 5 times
My 1/2 HP Model 139.53641SRT opener clicks to all my...
nosleep
Turning part of garage into storage/man cave/laundry
Some background in my project: 1. I need a study, so...
toffee-el
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™