Lift-master Garage Wall Opening Stopped Working

coramichelMay 20, 2012

Hi there,

I have a 1/2 hp lift-master garage door that was put in with the house when it was built in 2005. The last few weeks I've noticed when I've gone to close the garage door using the wall panel button that it wouldn't always work. I thought it was the sensors, so I kept making sure they were meeting up and then suddenly the wall panel button would work.

Now it's not working at all. But the remote does work. So, I know the problem has to be somewhere with the wall panel.

So my first question is how do I get the darn thing off without busting it?

And, then, once I do have it off, what do I check for? It just seems like it isn't receiving any power...the button light isn't on and if I push the light button it doesn't turn on the light.

Thanks!

Thank you for reporting this comment. Undo
don_1_2006

Sounds like a bad wall control. It is easy to eliminate this possibility by momentarily shorting the two wires together. There is more than one type of wall control. Without knowing the model it would be just a guess on how to remove it.

    Bookmark   May 21, 2012 at 9:37AM
Sign Up to comment
More Discussions
Snowblower help
I have a M t d model 317e760f118 track driven snow...
thechad1985
Need error codes for Craftsman 41A4315-7D.
Need error codes for Craftsman 41A4315-7D Garage Door...
don831
Chamberlain Garage Door Opener receiver problem
For the past 5 years, my Chamberlain Whisper Drive...
clarence_locke
Ice in garage on mild winter days
We have a two story house with an attached 2 car garage....
boubou64
Cabinets
Hi friends, I am looking for cabinets for my garage...
davidnc
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™