garage door opener

bronxbillApril 22, 2009

I have a 10 year old sears 1/2 garage opener- works great but for the last 4 years the light that goes on every time you break the plain has not worked. It comes on when the door opens then goes out after the required time. But it use to come on whenever you went past the actual opening. Other then that it works great thats the reason why I never tried to improved it. Any ideas

Thank you for reporting this comment. Undo
don_1_2006

To have your lights come on automatically when you walk into an open garage you must START with the lights ON.

To turn the feature on, turn the lights on manually with the wall switch, then press and hold the LIGHT button for about 10 seconds until the motor unit light bulbs flash. Now, if the light bulbs are on, manually turn them out and then walk out through the open door. The light bulbs should come on.

To disable this feature, start with the light bulbs OFF and everything else is the same.

    Bookmark   April 22, 2009 at 6:29PM
Sign Up to comment
More Discussions
Need help diagnosing Chamberlain Garage Door Problem
Hi, Have a 1/3 Chamberlain Liftmaster that started...
koalb01
Allister GDO not closing with remote
Having a problem with my Allister Access 3500 GDO not...
irishh7
who makes a 10x8 "Carriage House" style garage door?
Perusing the websites of most of the major garage door...
Daniel501
Shop vacuum
Are there any good 12 -15 amp shop vacs that have 1200-1500...
randalls1
Garage door won't open - even manually
Our garage door won�t open - the motor works,...
karyn
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™