Garage opener works from wall switch but not from remotes

diggitydApril 1, 2008

Craftsman 1/2 hp unit works perfectly from the wall mounted hard wired button. But no remotes will work. I have tried reprogramming the remotes and it takes. When I click the remote button the green light on the opener itself flashes but the door will not open or close.

So it seems the receiver is getting the signal from the remote but is not telling the unit to open or close. Again the wall switch performs perfectly with one quick push all the way open and closed. Any help? Thanks.

Thank you for reporting this comment. Undo
don_1_2006

Check to see if the light in the wall control button is flashing. If it is hold the lock button in for 3 seconds and try your remotes. If you also have a wireless keypad that is not working this will not be your problem. I would then suspect a bad logic board.

    Bookmark   April 1, 2008 at 6:57PM
Sign Up to comment
More Discussions
Garage Door Exterior Lighting Help Please
Hello members, On the exterior, do you prefer lighting...
pippit
Craftsman Garage Opener Clicks only and LED blinking 5 times
My 1/2 HP Model 139.53641SRT opener clicks to all my...
nosleep
Craftsman Garage door openers old dipswitch technology
My garage door motors still work great- 30 years old....
mamasalvo
Turning part of garage into storage/man cave/laundry
Some background in my project: 1. I need a study, so...
toffee-el
Ice in garage on mild winter days
We have a two story house with an attached 2 car garage....
boubou64
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™