Craftsman 53403 1/3 hp GDO

anhughesMarch 3, 2009

I have this repair to the light socket on the craftsman GDO and while removing the wires from the socket from the front pannel I had one of the wires touch the frame, and I didn't have it unpluged and this triped the circut breaker. After I replaced the light socket and assembled the cover then reset the circut breaker now the GDO doesent work at all. Asking for ideas or solutions on this or could this have don it in for good. Never had a problem in 20 years except routine gear replacement.

Thank you for reporting this comment. Undo
Chris Spinnato

You probably short circuited the logic board.
The replacement logic board is 41A3066
You can likely get it from the Sears parts if it is available

    Bookmark   March 3, 2009 at 8:32PM
Thank you for reporting this comment. Undo

You might pull the logic board and look for burnt or missing traces. Especially around the small transformer.

    Bookmark   March 4, 2009 at 9:32AM
Sign Up to comment
More Discussions
Snowblower help
I have a M t d model 317e760f118 track driven snow...
Shop vacuum
Are there any good 12 -15 amp shop vacs that have 1200-1500...
New construction.. Trying to decide on what flooring for garage..
Ok.. So we are building a brand new house and one of...
Garage Door Exterior Lighting Help Please
Hello members, On the exterior, do you prefer lighting...
Craftsman 3/4 HP Garage Door Opener w/Extension
I just installed a 9.18450 opener with a track extension...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™