craftsman gdo

robostonMarch 6, 2011

I replaced a worn gear and rpm sensor that broke and now the door only opens 6 inches and then reverses 6 inches and stops. Have made endless amounts of adjustments still to no avail. help

Thank you for reporting this comment. Undo

Make sure you put the black cup back on the end of the motor shaft and that it is pressed all the way on. Make sure the RPM sensor is plugged in. If neither of these are the issue, then you probably did not have the motor shaft pushed all the way back when you tightened the coupler after replacing the worm gear. Loosen that coupler up and from the front of the motor (opposite end in which the coupler is on) push the shaft back as far as it will go. Hold it there while you tighten the coupler back up and then try it.

    Bookmark   March 7, 2011 at 4:59PM
Sign Up to comment
More Discussions
2x6 strength? How much weight will a truss in my garage hold?
I want to build an engine hoist in my garage. I found...
Turning part of garage into storage/man cave/laundry
Some background in my project: 1. I need a study, so...
Need error codes for Craftsman 41A4315-7D.
Need error codes for Craftsman 41A4315-7D Garage Door...
Unfinished Detached Carport from 1924
Hi, My house and an accompanying detached garage were...
who makes a 10x8 "Carriage House" style garage door?
Perusing the websites of most of the major garage door...
Sponsored Products
Hammary Hidden Treasures Rectangular Console table with Fold-Out Top - T73026-00
Big Ring Doorbell Chime by Spore
$202.50 | Lumens
Hammary Hidden Treasures Martini Wire Table - Chrome - 090-632
$160.00 | Hayneedle
HSS Co-Op Small Copper One-Light Outdoor Wall Mount
$250.40 | Bellacor
Samara Dark Bronze with Light Bronze Four-Light Chandelier
$499.99 | Bellacor
Owalo LED Floor Lamp by Secto Design
$1,763.66 | Lumens
Minka Lavery Lugarno Square Craftsman-Mission Outdoor Post Lamp
Minka Lavery Scottsdale II Craftsman-Mission Outdoor Flush Mount
© 2015 Houzz Inc. Houzz® The new way to design your home™