Resetting keypad for Sears garage door opener

alan_smithMarch 26, 2006

My daughter recently bought a house from a deceased owner. It has a Sears model 139.53415SR garage door opener (circa 1991) with a remote keypad mounted outside. The keypad uses a 9V battery.

How can I reset the keypad code without knowing the original code?

Thanks,

Thank you for reporting this comment. Undo
maryland_irisman

I'm not sure if that model had dip switches or not. Can you tell? If it has dip switches, you would set the dips at the opener motor and the dips in the control outside to the same setting.

    Bookmark   March 26, 2006 at 9:37PM
Thank you for reporting this comment. Undo
Don_

On the back of the motor unit near where all those white wires go you will find a button. Press and immediately release that button and then walk over to the keypad and key in any 4 digit PIN of your choice and press enter. This should get you goint.

    Bookmark   March 27, 2006 at 4:18PM
Thank you for reporting this comment. Undo
davey_j

I just bought a house with a 15-year-old garage door opener (139.53415SR). I was able to reset the keyless entry, but now cannot program my own code in.

From reading other posts, I have gone up and pressed a yellow button on the back of the motor unit and then punched in a 4-digit code. This, however, has not worked.

Any ideas?

daveyj

    Bookmark   July 13, 2008 at 6:49PM
Sign Up to comment
More Discussions
Sun shines on sensor....
...and garage door will not stay down! Anyone have...
phoggie
Garage Door Torsion Spring
Have you noticed that local HomeDepot/Lowes do not...
mister_h
Cabinets
Hi friends, I am looking for cabinets for my garage...
davidnc
Craftsman Garage door openers old dipswitch technology
My garage door motors still work great- 30 years old....
mamasalvo
Need error codes for Craftsman 41A4315-7D.
Need error codes for Craftsman 41A4315-7D Garage Door...
don831
© 2015 Houzz Inc. Houzz® The new way to design your home™