Sears 1/2HP Garage door opener

mba1999February 2, 2009

Garage door stopped working. The green led flashed 5 times at a time. When pressing any of the openers you hear a clicking noise. The light on the opener does not come on either. It does have 120 going to the terminal on in the opener.

Thanks,

Randy

Thank you for reporting this comment. Undo
don_1_2006

Is the door stuck in the open position?

    Bookmark   February 3, 2009 at 9:29AM
Thank you for reporting this comment. Undo
mba1999

It stopped halfway while opening. I have disengaged it so the door can be opened manually. It does not move in either direction. The trolley is in the middle of the rail.

Thanks,
Randy

    Bookmark   February 3, 2009 at 10:50AM
Thank you for reporting this comment. Undo
don_1_2006

Take off the cover and check the drive gear. It is white nylon and is just in front of the motor. It sounds like something is jammed somewhere or the gear is stripped. The opener will not normally go down until it has opened fully and satisfied the logic board. Something is keeping it from doing this.

    Bookmark   February 3, 2009 at 1:21PM
Sign Up to comment
More Discussions
Shop vacuum
Are there any good 12 -15 amp shop vacs that have 1200-1500...
randalls1
Easy to use Backpack Blower Storage
I have been keeping my backpack blower on the floor...
blakeas
Need error codes for Craftsman 41A4315-7D.
Need error codes for Craftsman 41A4315-7D Garage Door...
don831
New construction.. Trying to decide on what flooring for garage..
Ok.. So we are building a brand new house and one of...
Jason143NBPD
Snowblower help
I have a M t d model 317e760f118 track driven snow...
thechad1985
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™