Sears Garage door opener closing problems

jj-walshFebruary 6, 2008

I have 2ea sears 1/2 HP, model#139.53627SRT units. Both units will not close without holding the wall button down.

They will move briefly and stop when closing using the remotes. The sensors are clean and aligned. There is no problem opening using the remotes or wall button. Only when closing.

Also, the light does not function any more on one unit.

They are about 14 years old...

Any recommendations?

Thanks

Thank you for reporting this comment. Undo
don_1_2006

If the main light flashes 10 times when the door reverses or you can hear the relay click 10 times then you have sensor problems.

    Bookmark   February 8, 2008 at 6:33PM
Thank you for reporting this comment. Undo
techdave

Are all four sensor led's lit and not flcikering, does the problem happen at night too?

    Bookmark   March 1, 2008 at 11:10PM
Sign Up to comment
More Discussions
Need Help with My SnowBlower
I just recently bought a Craftsman 24" snow thrower,...
bdouble
Garage Door Torsion Spring
Have you noticed that local HomeDepot/Lowes do not...
mister_h
Turning part of garage into storage/man cave/laundry
Some background in my project: 1. I need a study, so...
toffee-el
Mountain of leaves on my driveway
So I acquired a huge pile of leaves that I used for...
bibbus
Allister GDO not closing with remote
Having a problem with my Allister Access 3500 GDO not...
irishh7
© 2015 Houzz Inc. Houzz® The new way to design your home™