garage door wall mount push button install

chuehFebruary 2, 2014

I forgot which wires connecting to the White1 and Red1 of the push button originally. There are one blue and one white wires coming from the wall. I connected the blue wire with the RED1 of the button and the white wire with the WHITE1 of the button now, yet it's not working.

I also tested the voltage before I connected them, the continuity wasn't present. Is it supposed to be very low voltage? Can it be possible that the continuity had worked for "7" years but then quit??? I hate to humanize it, but can it be possible???
Thanks

This post was edited by chueh on Sun, Feb 2, 14 at 11:26

Thank you for reporting this comment. Undo
tim45z10

Touch the two wires coming from the wall together momentarily. Works? Button problem. No work its an opener problem, or the wires from the opener are the problem.

    Bookmark   February 23, 2014 at 4:47PM
Sign Up to comment
More Discussions
Unfinished Detached Carport from 1924
Hi, My house and an accompanying detached garage were...
Central_Cali369
garage door remote opens but wont shut door
I have a 10 year old Craftsman garage door opener model...
Junky
Wayne Dalton i-Drive vs. Belt Drive vs. Screw Drive
Hello All, I am looking to install 2 new garage door...
rogeroh
Cabinets
Hi friends, I am looking for cabinets for my garage...
davidnc
Garage Door Torsion Spring
Have you noticed that local HomeDepot/Lowes do not...
mister_h
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™