Help! Craftsman garage door remote and keypad problems

rockchalkchicagoJanuary 7, 2007

I am trying to fix my parents garage door problem and have to admit that I don't know much about it. They have two garage doors both powered by Sears Craftsman garage doors (one about 10 yo the other 6yo). The wireless keyless entry pads on both garage doors were failing in the cold weather and I tried to replace them with two Craftsman #53876 Keyless entry pads.

I replaced the first keypad, no problem. The second keypad, I programmed (I had to use a different pin or else it would open the first door) and it would open/close the door. The problem was that the remotes stopped working. I tried to reprogram the remotes and then they would work, but the keypads wouldn't.

How can I get this programmed so both the keypad and remotes work for this garage door opener? It's like they're operating on different frequencies. Also,

the keypad to the second door will open the first door if the first doors pin is put in. If anyone needs more info I am happy to provide it. Thanks!

Thank you for reporting this comment. Undo
don_1_2006

There is a chance you got the wrong keypads for the openers. Did you buy from Sears? Take the model number off each motor unit and you can verify with Sears parts.

    Bookmark   January 8, 2007 at 12:40PM
Sign Up to comment
More Discussions
Custom Wood Garage Doors
Does anyone know or have experience with wood garage...
linda_1010
Garage Door Exterior Lighting Help Please
Hello members, On the exterior, do you prefer lighting...
pippit
Unfinished Detached Carport from 1924
Hi, My house and an accompanying detached garage were...
Central_Cali369
Allister GDO not closing with remote
Having a problem with my Allister Access 3500 GDO not...
irishh7
Shop vacuum
Are there any good 12 -15 amp shop vacs that have 1200-1500...
randalls1
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™