1/2 craftsman

jkramerJanuary 31, 2007

I recently installed a new garage door opener (2 months ago) the last few weeks it has begun opening and closing at random times. Any ideas? There are no other homes close by that are using their garages at these times so i don't believe it to be mixed signals.

Thank you for reporting this comment. Undo
don_1_2006

This problem is most commonly caused when staples cut through the insulation of the wiring to the wall control. You can eliminate this possibility easily by removing the white wire with red tracer from terminal 1 at the opener. This will disable the wall control and the wiring to it. If the problem stops check the wiring and wall control.

    Bookmark   February 1, 2007 at 5:21PM
Thank you for reporting this comment. Undo
jburbea

i have the same 1/2 craftman it worked fine for several years but now it does not recognize my remote and does not respond to any new settings.

i was advised that the garge door opener work fine but i need some setting to be fixed.

    Bookmark   February 11, 2007 at 1:20PM
Sign Up to comment
More Discussions
Easy to use Backpack Blower Storage
I have been keeping my backpack blower on the floor...
blakeas
Need Help with My SnowBlower
I just recently bought a Craftsman 24" snow thrower,...
bdouble
Craftsman Garage door openers old dipswitch technology
My garage door motors still work great- 30 years old....
mamasalvo
Craftsman garage door opener problems
I am having trouble with my 3 year old Craftsman garage...
magilla_53
Craftsman Garage Opener Clicks only and LED blinking 5 times
My 1/2 HP Model 139.53641SRT opener clicks to all my...
nosleep
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™