!/2HP Craftsman Door Opener

dalilaJanuary 18, 2007

I've a door that suddenly refuses to open using remotes. I've changed batteries, done the "program the tranmitter/receiver steps by pushing both buttons until the LED starts flashing again but its a no go. I can see the the LED flash on the receiver whenever I press the button on either remote so I think its trying to talk but the door never budges, light bulb never blinks, etc. The wired in controller on garage wall works fine. Any ideas would be appreciated. Apparently Sears has no online document system to help troubleshoot or learn a thing about their products that I've been able to find. Thanks, dalila

Thank you for reporting this comment. Undo

dalila first of all make sure the lock function hasn't been toggled on at your wall control. If the small light in the button is flashing press and hold the lock button for about 3 seconds. If the light quits flashing that was probably your problem and your remotes should work.

    Bookmark   January 19, 2007 at 4:54PM
Sign Up to comment
More Discussions
Need error codes for Craftsman 41A4315-7D.
Need error codes for Craftsman 41A4315-7D Garage Door...
who makes a 10x8 "Carriage House" style garage door?
Perusing the websites of most of the major garage door...
Light on my garage door opener won't turn off
The light on my old Genie Medallion Series garage door...
Garage Door Torsion Spring
Have you noticed that local HomeDepot/Lowes do not...
Ice in garage on mild winter days
We have a two story house with an attached 2 car garage....
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™