Garage Door Opener wall console

studpupJanuary 27, 2008

My Craftsman Garage Door Opener (139.53976SRT) works fine except for the motion detecting wall control. The remotes and keypad will open the door but the hardwired wall control will not. The indicator light on the control blinks 5 quick times, pauses then binks 5 quick times - continually. The lock switch will work as will the motion detecting light switch. The push button to open the door does not work. What are the blinking lights telling me? The part number of wall console is 41C0472-1. I can ground the bell wire and the door will open and close so it is some fault in the wall console. We had a short power failure prior to this happening.

Thanks

Thank you for reporting this comment. Undo
doorguy06

I have no idea what the five blinks mean. I have never encountered this problem. However if the opener works fine from all other devices and when you ground the bell wire the opener works fine, then all problems point to the wall button being bad. I would replace the wall button.

    Bookmark   January 27, 2008 at 8:20PM
Sign Up to comment
More Discussions
Craftsman Garage door openers old dipswitch technology
My garage door motors still work great- 30 years old....
mamasalvo
Garage Door Torsion Spring
Have you noticed that local HomeDepot/Lowes do not...
mister_h
Cabinets
Hi friends, I am looking for cabinets for my garage...
davidnc
What's the Lowdown on Garage Door Brands??
I have read some prior posts on steel garage door brands...
Xena99
Chamberlain Garage Door Opener receiver problem
For the past 5 years, my Chamberlain Whisper Drive...
clarence_locke
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™