craftsman 1/2 hp garage door opener

triolopJanuary 17, 2009

I have just replaced the door opnere spindle, due to the teeth were srtipped due to frozen door.

After I replaced the spindle gear, the garage door would not operate. It would close, then come back up and the glide bar would lock up at the bolt in the rail. I pressed teh operation button and teh motor tried to start but did not operate and the green light on the back of the opener blinked green. I re-adjusted the chain tightness several times, with no avail. Is there another problem showing up?

Thank you for reporting this comment. Undo
don_1_2006

It sounds like the up and down limits need to be adjusted. To start, turn them about 3 turns in the opposite direction of the arrows printed on the cover. This should get things going and then some tweaking will need to be done. Notice that the arrows point in opposite directions.

    Bookmark   January 19, 2009 at 10:19AM
Sign Up to comment
More Discussions
Craftsman Garage door openers old dipswitch technology
My garage door motors still work great- 30 years old....
mamasalvo
Keyless lock for manual garage door?
I have a two car garage with separate manual lift garage...
mrpandy
Custom Wood Garage Doors
Does anyone know or have experience with wood garage...
linda_1010
Light on my garage door opener won't turn off
The light on my old Genie Medallion Series garage door...
liviey
Craftsman garage door opener problems
I am having trouble with my 3 year old Craftsman garage...
magilla_53
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™