change PIN for keyless entry transmitter

herbiJanuary 24, 2009

I would like to change PIN for keyless entry transmitter (#18755). Note: I have followed online instructions which include pressing an "enter" button. However, this 1980s devise doesn't have an enter button to push after entering a PIN. Need help.

Thank you for reporting this comment. Undo
don_1_2006

Check your other post.

    Bookmark   January 25, 2009 at 2:01PM
Thank you for reporting this comment. Undo
herbi

what other post? i think i've only posted this one issue. pls elaborate.

    Bookmark   January 26, 2009 at 11:57AM
Thank you for reporting this comment. Undo
don_1_2006

Good question. I can't find it now either but I did ask you a question and I will again. Is your keypad hardwired?

    Bookmark   January 26, 2009 at 4:57PM
Thank you for reporting this comment. Undo
herbi

yes..keypad is hardwired to another transmitter which also operates the garage door and is located just inside of garage door.

    Bookmark   January 29, 2009 at 10:37AM
Thank you for reporting this comment. Undo
don_1_2006

Okay we can do it now. Follow these instructions.

First unplug the garage door opener from the electrical outlet. Next remove the nameplate from the console that the keypad plugs into and locate the program/operate switch. Flip the switch to program. Next enter your desired four-digit PIN number into the keypad. Slide the switch back to operate and plug the garage door opener back in. The keypad should be programmed.

    Bookmark   January 29, 2009 at 5:04PM
Thank you for reporting this comment. Undo
herbi

Success! and this didn't cost me a penny and the landfill site must be happy too!

thanks Don.

    Bookmark   January 30, 2009 at 1:07PM
Sign Up to comment
More Discussions
Need error codes for Craftsman 41A4315-7D.
Need error codes for Craftsman 41A4315-7D Garage Door...
don831
Sun shines on sensor....
...and garage door will not stay down! Anyone have...
phoggie
Garage Door Exterior Lighting Help Please
Hello members, On the exterior, do you prefer lighting...
pippit
Craftsman Garage door openers old dipswitch technology
My garage door motors still work great- 30 years old....
mamasalvo
who makes a 10x8 "Carriage House" style garage door?
Perusing the websites of most of the major garage door...
Daniel501
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™