Heat N Glo Gateway Won't Light - Help!

halbooNovember 25, 2012

We installed a Heat N Glo Gateway in our home in 2002.

It worked very well the first few winters but the past couple years it's been getting hard to get it to light with the remote or the switch. It often takes several tries to get it to work and sometimes we just give up and this morning is one of those days.

It has an IPI start. The sparker works seemingly well enough and it started first thing when I cleaned it up a couple weeks ago for this winter's use.

The dealer wants $200 just to walk in the door.

Help Please!

Thank you for reporting this comment. Undo
halboo

So right after I made the opening post, I went and tried it again and it started right up...
Very Frustrating!

    Bookmark   November 25, 2012 at 2:19PM
Sign Up to comment
More Discussions
Linear Fireplace
Can I put a 60 inch linear fireplace in place of this...
kjez2010
Gas fireplace- fan or no fan?
Looking at a Mendota and a Heat N Glo full view single...
ryebread2111111
1st timer needs pellet stove guidence
The wife and I just bought a new single floor 1800...
bksinaz
Vermont stove
I have a resolute acclaim stove and the sealer around...
edtrac
Converting wood fireplace to gas fireplace
Help, I'm overwhelmed. Any link to a good site that...
nosoccermom
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™