Installing Greensmart 864 fireplace

snuddenstangApril 13, 2010

I am building a family room and adding a gas fireplace. I am having the mason build a bump out for the fireplace foundation as the fireplace will be flush with the interior walls. The fireplace is a GreenSmart 864 TRV. The installation manual says the rough framing for the width is 41 1/4" and the depth from the front edge of the framing to the rear of the fireplace is 20". These measurements include the 1/2 required clearance. I am framing using 2x6's. I am going to tell the mason to bump out the foundation 41 1/4 + an additional 6 inches on each side for the 2x6 framing bringing the width to 53 1/4 and for the depth 20 + 6 inches for the for a total of 26 inches. Can anyone confirm my measurements?

Here is the link for the installation instructions, page 12

Thank you for reporting this comment. Undo

How have you liked your GreenSmart. looking at the same model for a new home

    Bookmark   November 15, 2014 at 11:46AM
Sign Up to comment
More Discussions
Does this old fireplace have options?
Hey everybody! My home was built in 1930 and originally...
Kristin Jennings
Converting wood fireplace to gas fireplace
Help, I'm overwhelmed. Any link to a good site that...
Xtrordinair Fireplace
We were directed to a local shop selling this product....
Recommendation on direct-vent gas fireplace?
Hi all, We are building a new home and plan to have...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™