Harman Accentra 2 F.S. Pellet stove Keeps blowing fuses ? Help

dcherMarch 24, 2013

My 5-6 year old Harman Accentra 2 stopped feeding pellets for about 1 hour ( When it was calling for Pellets) and fire was going out even though the temperature was calling for fire.

Unplugged stove in hopes of resetting computer
When plugged back in the feed light lit and auger started but then fuse blew and everything shut off :-(

Replaced 6 Amp fuse and it does the same exact thing auger starts and fuse blows ...

Thinking possible Auger Motor problem ...

It is Palm Sunday and no one is answering their phones to fix it and we are supposed to be getting a snow storm here in PA. tonight and tomorrow So who knows if & when I will be able to get the 1 and only Harman dealer out to look at it.

Was working perfectly fine until this happened
Any and all help and/ or suggestions would be greatly appreciated... as it is getting cold in here already
Thanks

Thank you for reporting this comment. Undo
AudreyW10

I had a similar problem with my pellet stove from Quadra-fire. So I called them up and the guy said that I need to turn it off long enough for it too cool down, give it a good clean out because there could be some residue, ash or build up that is getting in the way for the system to work properly. He used some other fancy words but what I heard was that it needs to be thoroughly cleaned at least every year and I haven't done that in two winters. Hope this helps and good luck!

Here is a link that might be useful: Quadra-Fire

    Bookmark   April 10, 2013 at 11:06AM
Sign Up to comment
More Discussions
Converting wood fireplace to gas fireplace
Help, I'm overwhelmed. Any link to a good site that...
nosoccermom
I need opinions on what to do with old fireplace
I have an old fireplace that needs a rehab badly. What...
jbryan21
How can I update this 60s facade?
The home I'm buying was built in 1959 and I don't think...
demeterchaos
Vermont stove
I have a resolute acclaim stove and the sealer around...
edtrac
Help me decide on a fireplace unit for new build
We are doing a gas Heatilator unit. Is there much difference...
brodyt
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™