Type of bolt for Panasonic TC-P50s30

jimracSeptember 4, 2011

Hi all,

We just bought the above plasma tv. Now we want to mount the tv to our ent. center; however, they dont include a bolts that go thru the braket that is attached to the back of the tV. Bought it from Best Buy; the instruction are vague, horribly written. They mention an M8..

What is M8; or waht kind of bolt should i use; in the sintructions they just mention it should be ceryaon lenghth etc..

Much appreciated.

JIm

Thank you for reporting this comment. Undo
yosemitebill

According to the television manual it calls for M8 screws with a minimum 17mm, and maximum 22mm, of penetration into the television.

So you would use 8mm machine thread screws, that achieve that range of penetration, plus additional length for the thickness of the mount and any washers if recommended.

Wall mounts usually come with an assortment of screws in various sizes that usually will fit your needs.

    Bookmark   September 4, 2011 at 11:44PM
Thank you for reporting this comment. Undo
jimrac

ok, very good, thank you. much appreciated. Jim

    Bookmark   September 5, 2011 at 7:19AM
Sign Up to comment
More Discussions
Where to buy cassettes for music
We still play cassettes in two of our old cars. I need...
loralee
plug-in tart warmers - parchment-paper safe?
Hi, re: plug-in wax-tart warmers: Is it safe to cover...
jally
Lost sound on my computer.
Once again I need your help. I have been persuaded...
ronalawn82
home stero using XM radio
i am building our retirement home and have installed...
coetexas
50" dlp tv
Here is a picture of the whole part...
tribefan53
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™