Panasonic vcr no remote, want to change speed

snaffleSeptember 26, 2006

I have a panasonic vcr Model PV-8451 with out a remote. I want to record but it is set on slp. How can I change the speed to SP? I have a ONE FOR ALL remote and there is no button for speed on it.

Thank you for reporting this comment. Undo
chckandco

You may be dead in the water unless the remote that you DO have has the ability to run "set up" or whatever iut might be called for your model. That is usually where you choose what speed you are electing for your project. If you have your manual, you can look in it and see if this is correct. If you do (or don't), if you have the manual fo the one size fits all remote, then you can look to see if it has that capability. Some vcrs may have you choose it on screen but ususally not. Good luck, and let us know whta you find!

    Bookmark   September 27, 2006 at 6:50PM
Thank you for reporting this comment. Undo
jdbillp

If you really like this model of VCR there is a used one on eBay right now. Buy it now is $26 with $18 shipping.

$44 is still probably cheaper than getting a new remote from Panasonoc.

Here is a link that might be useful: ebay auction

    Bookmark   October 1, 2006 at 10:31PM
Sign Up to comment
More Discussions
Sounds like a fan going bad
I have a Magnavox 50ML8105D/17 (DLP-TV)..there is a...
tribefan53
POTS phone extension over local ethernet?
Through a mess up in communication I got a gigabit...
rwiegand
I need "Pairing Code" information for my TV.
What is the pairing code for my Magnavox TV Model #...
Tammy Lanier
Best and thinnest flat screen wall mountable tv less than 20" high?
I am so out of my depth here. I would greatly appreciate...
bellsmom
previous post about 50ML8105D
My previous post about my Magnavox/Phillips 50"...
tribefan53
© 2015 Houzz Inc. Houzz® The new way to design your home™