Philips/Magnavox rear projection problem

scott50August 6, 2009

I have a Philips/Magnavox rear projection TV, Model PTV840. I am having convergence problems. Bowed screen Red/Blue/Green colors out of alignment. Cannot adjust this within the Menu under Convergence. Is there a repair kit of parts that I can purchase and install myself that will fix this problem? Thank You for any help you can offer.

Thank you for reporting this comment. Undo
imimin

You will need 2 stk392-160. Replace on large heat sink. Also check all fusible resistors around the STK's/heatsinks.

    Bookmark   August 6, 2009 at 5:18PM
Thank you for reporting this comment. Undo
scott50

I replaced both STKs. They were STK392-110. I also replaced all twelve resistors. Got them from an online store. Magnavox Convergence Repair Kit TV-KIT-008. All the same issues though. What else could it be. Any suspect fuses that may be bad.

    Bookmark   August 13, 2009 at 1:56PM
Sign Up to comment
More Discussions
home stero using XM radio
i am building our retirement home and have installed...
coetexas
Sounds like a fan going bad
I have a Magnavox 50ML8105D/17 (DLP-TV)..there is a...
tribefan53
modem switch, ethernets, and extension cables
Hi, I'm hoping someone can steer me in the right direction....
jally
seek expert on plug-in wax-tart warmers
I bought this plug-in tart warmer via the Net, made-in-china,...
jally
cheap tv
got a nice working fully functional 32" lcd yesterday...
stoveguyy
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™