Philips Magnavox # PTV835, Model # 9P6034

tekjJuly 1, 2007

Good Day,

I was reading through your site, and I have the same TV w/ a similar problem (as below). My TV has the concave picture top & bottom, but everything else is fine. While reading the site I didn't come across the possible solution, so I was hoping to get a remedy.

Thanks very much,

tekj

Posted by gkiser (My Page) on Sun, Dec 26, 04 at 18:44

Hello, and Happy New year!

Please help, I have a phillips magnavox 60" manufactured in

2000, chassis # PTV835, Model # 9P6034 C101. When first

turned on the picture would go to a concave type and 1/2 size, and the volume would go up and down, however after being left on for about 15 minutes the picture would go back to normal, It kept getting worse and worse and now I have no picture at all nor any sound. The sound seemed to get worse along with the picture. Also it seems the remote would no longer operate the TV once the problems started. I have a limited knowledge of TV's but do know electronics pretty well. I'm guessing I have a voltage problem but do knt know how to diagnos the part that's bad. Can you offer any suggestions? I have pow4er to the set and the green LED lights up when the power switch is turned on but that is all it will do. No hum, no buzz nothing

Thank you for reporting this comment. Undo
jdbillp

time to move down

    Bookmark   July 16, 2007 at 5:36AM
Sign Up to comment
More Discussions
50" dlp tv
Here is a picture of the whole part...
tribefan53
RCN Cable box question
I have a 55" LG LED tv. Its connected to an RCN...
andrelaplume2
transfer hi8 tapes from sony ccd-trv98 to mac ??
Hi ~ What is the best and fastest way to transfer Hi8...
kathybeachgirl
Throw them away ?
I have a DVD player, a cassette player , a tuner ,...
salbwil
modem switch, ethernets, and extension cables
Hi, I'm hoping someone can steer me in the right direction....
jally
© 2015 Houzz Inc. Houzz® The new way to design your home™