PE Design 6

afforddesignsNovember 7, 2005

Can anyone tell me how to have the machine trim the jump stitches? Something about a thread trimming system? Thanks

Regina

Thank you for reporting this comment. Undo
joansews4u

I didn't know there was a way unless it was built into the machine. Hope someone tells us how.

    Bookmark   November 7, 2005 at 8:43PM
Thank you for reporting this comment. Undo
msmeow

I also think it is the machine that does it, not the software. The new Innovis 4000 trims the jump stitches.

Donna

    Bookmark   November 9, 2005 at 4:00PM
Thank you for reporting this comment. Undo
genietay

I have a Brother ULT 2002 and a smaller PE150. I was ask by someone who had the Brother PR-600 to help them with a design. I created the design using PE Design 4 and it did really good, except for the jump stitches, which I couldn't seem to correct.

I was amazed when I took it to them and at every jump stitch, even though it was the same color, it stopped and clipped the thread.

This leads me to believe it is in the machine.

I have recently purchased an upgrade of version 4 to version 6, but haven't really had time to play much with it (major kitchen re-model). It does seem that it is going to be easier to make adjustments, especially when you want only part of an embroidery design to combine it with another one.

    Bookmark   November 14, 2005 at 9:22PM
Sign Up to comment
More Discussions
Need help with my Janome 350e
I have a Janome 350e. It has been sewing beautifully....
Hilary Motzouris
pe design 2.0 help!!
hiya ive brought pe design 2.0 off of ebay its come...
mrsgeorge
Husqvarna-Viking Designer 1 Software
Hi all, I have recently decided to try out the embroidery...
MaryPrim
Making letters
What is the best way to make my letters and words even?...
tim45z10
Help with embroidery
I just recieved the Brothers SE400 sewing and embroidery...
JordonWalker0722
© 2015 Houzz Inc. Houzz® The new way to design your home™