phillips projection tv model 51pp9910/17

deewillsMay 10, 2010

I can not align the red on the convergence page. I have followed the directions for aglinment but the red will not move.I have tried calling the mfg but because the tv is out of warranty they will not speak with me.Any help would be greatly appericated.Has anyone else had this problem?

Thank you for reporting this comment. Undo
jdbillp

Call a tech.

    Bookmark   May 30, 2010 at 8:50AM
Thank you for reporting this comment. Undo
rockstar90

To me it sounds as if your convergence Stk chips have blown when this happens its a possibility it took out some resistors and pico fuses too.

I'm no TV repair tech but I fixed 2 TV's that had blown Stk's.
so most likely its the same problem you got.

Not much i can help you with but maybe put you on track to what the problems is called.... search up about TV convergence and try Philips convergence.

Lots of rear projections got this problem do to the chip running extremely hot.

If you can solder and have the equipment to solder you can probably do it your self much cheaper then a repair shop would charge you.

Here is a link that might be useful: Repair kit Here

    Bookmark   September 25, 2010 at 11:32PM
Sign Up to comment
More Discussions
why do I have to "install"apps on my tablet?
So why do I have to install apps on my tablet that...
clairebuoyant
OTA, I'm Back
I got rid of cable and now am using a converterbox...
boothbay
vizio xvt473sv dead
I have a 4 year old VIZIO XVT473SV that now has NO...
thew60
13.2v Battery Charger
The battery charger for my Craftsman drill has died...
randy427
seek expert on plug-in wax-tart warmers
I bought this plug-in tart warmer via the Net, made-in-china,...
jally
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™