Can I perform a DIY upgrade on my Ademco security system?

Tony2ToesApril 12, 2013

We have an older Ademco home security system. Door and window contacts work fine but the motion detector is the older variety that isn't pet friendly. I'd like to upgrade that to a motion/IR sensor. Can I just upgrade the one sensor? And will any brand of wired sensor work?

Thank you for reporting this comment. Undo
albert_135

Since you have patiently waited for 18 days for a response here I would ay you may try.

    Bookmark   April 30, 2013 at 2:31PM
Thank you for reporting this comment. Undo
geller

Yes, you can do this just by replacing the sensor. I bought a new PIR sensor via the internet and installed it. It just takes some fiddling with the blocking pattern to get the sensing area to be what you want it to be.

    Bookmark   May 1, 2013 at 3:19PM
Sign Up to comment
More Discussions
previous post about 50ML8105D
My previous post about my Magnavox/Phillips 50"...
tribefan53
OTA, I'm Back
I got rid of cable and now am using a converterbox...
boothbay
modem switch, ethernets, and extension cables
Hi, I'm hoping someone can steer me in the right direction....
jally
why do I have to "install"apps on my tablet?
So why do I have to install apps on my tablet that...
clairebuoyant1
Cables and wiring? Cat6, hdmi, coaxial, ethernet?
I've been reading a lot on here about wiring our new...
tulips33
Sponsored Products
Mitroon 30 Garden Hose by ZEE
$335.00 | Lumens
Mini Star Chrome Mini Pendant with Royal Cut Light Peridot Green Crystal and Squ
$150.00 | Bellacor
Averex Sofa Sectional
Opulent Items
Gatco Chrome Zone 28 1/2" x 32" Large Oval Wall Mirror
Lamps Plus
QualArc Bayside Estate Lighted Address Plaque - LT6B-1310
$159.99 | Hayneedle
George Kovacs Loupe 33 3/4" Wide Bronze LED Bath Light
Euro Style Lighting
Tall Cylindrical Hammered Copper Watering Can
Signature Hardware
EdgeStar Full-size Kegerator and Beer Dispenser
Overstock.com
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™