PES-2 Reader Writer Box and Software

redpennyAugust 1, 2004

Has any one used this reader writer box pro-cons!It is suppose to be made before the ultimate box.

Thank you for reporting this comment. Undo

Just purchased a PES-2 Reader Writer Box and Software soo thrilled now all I have to do is buy a card for it.

    Bookmark   August 3, 2004 at 6:03PM
Thank you for reporting this comment. Undo

I'm new to embroidery. I just bought a used Brother PE150. What's the different between a magic box and a PES-2 Reader Writer Box?

CS :)

    Bookmark   August 9, 2004 at 8:34PM
Thank you for reporting this comment. Undo

csackett, heres some information on the Pes2

PES2Card can currently handle cards that have a capacity of approximately up to 260.000 stitches. NO special rewritable memory flash card required, re-use existing cards. PES files created using PE Design / Palette / Deco Wizard can be sent directly to a Brother or Viking embroidery card. There is no need for conversion between
PES and HUS format to write designs to a Viking embroidery card. PES2Card3 will accept PEC, PES and HUC files when writing to a Viking/Husqvarna card. This includes writing multi position designs created using PE Design 2.5 and upwards. During read both PEC and HUC format will be produced if a Viking/Husqvarna card is present. The HUS2Card utility allows writing existing HUS files to a Viking card. PES2Card writes most common embroidery formats directly to a card for use in Babylock, Brother, Bernina Artista or Deco, Simplicity, Viking 1+ and Rose machines without conversion (pes, pec, phc, hus, huc, shv, pcs, pcm, vip, sew, jef, dst, dsb, exp, xxx, fmc, fdr, dat, emd, psf). It writes these different formats for your machine in the same programming cycle. PES2Card utility 1.03.009 and higher can write all supported formats directly to a floppy suitable to be embroidered on the Designer I. No conversion is needed for writing. But this does not mean the file types are converted to Designer I formats (See the FREEDOM SOFTWARE.) PLUS it can work with USB by an converter cable and PES2Card3 software. Current PES2Card owners can upgrade free of charge the PES2Card utility to enable the support for Viking embroidery cards.I also got the updated software

    Bookmark   August 9, 2004 at 11:18PM
Thank you for reporting this comment. Undo

link with information csackett

Here is a link that might be useful: sewing room

    Bookmark   August 9, 2004 at 11:22PM
Thank you for reporting this comment. Undo

Another link csackett

Here is a link that might be useful: sewstuff

    Bookmark   August 9, 2004 at 11:25PM
Sign Up to comment
More Discussions
Wanting to know more about machine embroidery
A friend brought back from France a really beautiful...
Making letters
What is the best way to make my letters and words even?...
pe design 2.0 help!!
hiya ive brought pe design 2.0 off of ebay its come...
Pfaff 5D software
Hello, I am purchasing a Pfaff 2140 machine at a local...
Singer Futura CE100
Hi, I am new to the forum and desperate to speak to...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™