problem with new singer futura CE 100 machine.

rajbalaJuly 18, 2006

Hi

I just got a brand new Singer futura CE 100 machine. I was setting it up and the first thing I noticed that the feed dog does not move (up or down) when I move the feed-dog switch left and right. The feed dog is in the lower position. Is this a problem with my new machine?

Thanks for any input. I am a little scared and nervous that my new machine might be broken :-(

Rajbala

Thank you for reporting this comment. Undo
stitchntime9

If you turn the handwheel the feed dogs should raise if you put the switch in the up position...I thought the same thing. Read your manual page by page first, second, third time. There is a lot of information to digest and also view the video.

    Bookmark   July 19, 2006 at 3:30PM
Thank you for reporting this comment. Undo
grandmadeb

The feed dogs will engage like stichntime said when you move the hand wheel. Just remember that they must be down for embroidery and up for regular sewing. It's easy to forget believe me. Especially when you are jumping back and forth between the two.

    Bookmark   July 25, 2006 at 4:39PM
Sign Up to comment
More Discussions
Singer Futura CE100
Hi, I am new to the forum and desperate to speak to...
Karen_Ann
PE Design Software
I lost my PE design2 when I changed computers.I am...
Jmyelou
Viking embroidery machine software
I am interested in purchasing embroidery designing...
kiki31348
Husqvarna-Viking Designer 1 Software
Hi all, I have recently decided to try out the embroidery...
MaryPrim
thread breakage
Help please. I have a Futura CE200. All was well. Have...
crittersareme
© 2015 Houzz Inc. Houzz® The new way to design your home™