Embroidery-Topaz 20

mamakat3June 9, 2009

I am very familiar with machine emb. having been using my Viking Rose for about 8 years now. Just purchased a Topaz 20, and noticed there is no template for placement of emb. before hooping. So I tried my first emb with what I thought was a center placement but it went too far to right. Can anyone tell me how they figure placement of the hoop to get it right? Thanks a million.

Thank you for reporting this comment. Undo
gazaah

Can you sew your own template and starch it, or run it through a copy machine to put it on paper?

Use design software to make a large rectangle with the maximum dimensnsions for your machine. Add an X connecting the corners to identify the middle, embroider it, and before de-hooping trace the inside edge of the hoop. Then de-hoop and cut along the line to make a drop in template

    Bookmark   June 14, 2009 at 11:41PM
Thank you for reporting this comment. Undo
nicki_h

Glad to see someone else with a Topaz 20. Check your marks on the hoop. The center of the hoop is not the center of the design. The hoop has alignment marks. This was hard for me to learn to do.

    Bookmark   June 21, 2009 at 10:43PM
Sign Up to comment
More Discussions
Babylock Palette v9
Help! After a windows 8 update today, my card reader/writer...
kyserparker
Help with embroidery
I just recieved the Brothers SE400 sewing and embroidery...
JordonWalker0722
Help!! Anyone have a Brother SE-270D embroidery unit?!
Help! I made a huge mistake. I knew nothing about sewing...
Caitmon
Husqvarna-Viking Designer 1 Software
Hi all, I have recently decided to try out the embroidery...
MaryPrim
thread breakage
Help please. I have a Futura CE200. All was well. Have...
crittersareme
© 2015 Houzz Inc. Houzz® The new way to design your home™