Philips Magnavox 32' TV TS3260CI

jainteFebruary 18, 2007

I recently purchased the 32 inch TV that had bad color on one small side of the screen due to a fall, according to the previous owner. I got it home and everything worked great, with the exception of the 2 inch ellipse of color distortion on the left side of the TV. I had heard that this problem could likely be caused by moved alignment magnets and I may be able to fix it myself, so off I went ...

While attempting to take the TV cover off, I forgot to take out the 2 screws that are on the cover plate for the TV inputs, and put some pressure on the board when attempting to remove the cover. I looked around inside the TV and saw nothing glaringly wrong with it, so I put the cover back on without moving too many things. Now, when I power on the TV, there is just a bright white horizontal line for about 3 seconds, then the TV powers back down. Any ideas on what to do to fix this, or at least diagnose it?

Thank you for reporting this comment. Undo
nauticalx

yeah, toss it

    Bookmark   February 21, 2007 at 11:19PM
Sign Up to comment
More Discussions
home stero using XM radio
i am building our retirement home and have installed...
coetexas
RCN Cable box question
I have a 55" LG LED tv. Its connected to an RCN...
andrelaplume2
Sounds like a fan going bad
I have a Magnavox 50ML8105D/17 (DLP-TV)..there is a...
tribefan53
I need "Pairing Code" information for my TV.
What is the pairing code for my Magnavox TV Model #...
Tammy Lanier
plug-in tart warmers - parchment-paper safe?
Hi, re: plug-in wax-tart warmers: Is it safe to cover...
jally
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™