Wiring two speakers to a volume control and to a rciever

noel-irelandFebruary 8, 2008

My understanding of this is. Run two wire speaker wire from

both speakers to a volume control in room and then run four wire from the volume control to a reciever while paying attention to which colors of the four wire goes to which speaker. I will be connecting about 4 areas this way to a multi zone reciever. Does this sound right? I am also connecting surround sound speakers for movies.

Thank you for reporting this comment. Undo

make sure the volume control is a stereo one. many recievers will shut down or short out if you conenct the left/right together.

also, you cannot run zip cord style speaker wire inthe wall, it has to have a jacket.

    Bookmark   February 8, 2008 at 12:11PM
Sign Up to comment
More Discussions
Best and thinnest flat screen wall mountable tv less than 20" high?
I am so out of my depth here. I would greatly appreciate...
50" dlp tv
Here is a picture of the whole part...
POTS phone extension over local ethernet?
Through a mess up in communication I got a gigabit...
Sounds like a fan going bad
I have a Magnavox 50ML8105D/17 (DLP-TV)..there is a...
Need a new Tv, thoughts on led/plasma
Im in the market to get a new tv. I have always preferred...
Sponsored Products
Veer Drafting Stool in Gray
$115.00 | LexMod
Homelegance Kinston Counter Height Table in Distressed Oak
Beyond Stores
King Filigree Duvet Cover 106" x 92" - IVORY/BLACK (KING)
$475.00 | Horchow
Sea Gull Lighting Ceiling Mounted Lighting 1-Light Small Heirloom Bronze LED
$86.67 | Home Depot
2nd Avenue Lighting Volta Two-Light Wall Sconce
$594.00 | LuxeDecor
Silver LED Touch Table Lamp
$24.99 | zulily
Nameeks | Vanita and Casa Lighted Vanity Mirror 7095-702S
$840.00 | YBath
15752AZT Bronze 12.4 Watts Medium Kichler LED Landscape Light
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™