Repairing Treadmill motor speed control Board

iggieJanuary 3, 2013

My wife,s Pro Form Model PFTL39120 developed problems after a power outage.I have checked as far as I know how to, the platform will elevate up and down, which I assume means the power supply board is ok, however the motor will not move via the speed adjustment. I tested the motor windings and they test ok. What do I start checking on the motor speed control board. Any body out there have any experience with these boards, any help or suggestions will sure be appreciated. Iggie

Thank you for reporting this comment. Undo
toxcrusadr

You might contact the manufacturer and see if you can get a service manual or schematic. Or see if they have a replacement board you can install.

    Bookmark   January 3, 2013 at 12:23PM
Sign Up to comment
More Discussions
Headphone jack
Dug up a sub-mini plug for my home phone earphone jack....
stoveguyy
Sounds like a fan going bad
I have a Magnavox 50ML8105D/17 (DLP-TV)..there is a...
tribefan53
aspect ratio
We have 2009 insignia LCD. Am using Comcast mini hd...
stoveguyy
plug-in 15w bulb caused sticky mess (wax melt)
Stupid me, I bought a plug-in wax melter / tart-warmer...
jally
modem switch, ethernets, and extension cables
Hi, I'm hoping someone can steer me in the right direction....
jally
© 2015 Houzz Inc. Houzz® The new way to design your home™