Fisher Paykel disdrawer won't start

acc0406September 30, 2013

I have the DD603I, and the power button and start button are unresponsive (the lock button still works). Any ideas as to why 2 of the 3 buttons just stopped working? Can it be repaired?

Thank you for reporting this comment. Undo
dadoes

Is the lock button light lit? The unit may have been placed into child-safety keylock mode. Try pressing and HOLDING the lock button for approx 5 seconds. It'll beep once when initially pressed, then should beep again with a slightly different tone (the light will turn off).

    Bookmark   October 1, 2013 at 4:38PM
Thank you for reporting this comment. Undo
bmorepanic

Next thing if that doesn't work, cut the circuit breaker to the unit and then reset it after about 30 seconds. It's got a microprocessor and they can go a bit insane from unstable power.

What a cool idea to try the child lock, dadoes.

    Bookmark   October 2, 2013 at 4:12PM
Sign Up to comment
More Discussions
Who makes Counter Depth fridge less than 36" wide
Hi, who makes a counter depth fridge that is only say...
Brad Goodyear
48 inch Bertazoni Dual Fuel or MIELE Range and Combi Oven Steamer
I am putting my options of getting the range. I have...
hkwan
Over & Under refrigerator advice/options
I am remodeling my kitchen and planning to use separate...
uscpsycho
Shark Hard Surface Steam CleanerSE3306C steam not coming out of nozzle
Hi, Our Shark Hard Surface Steam Cleaner is heating...
danadevy
Any experience with a Miele or other plumbed-in coffee machine?
Heavily considering a plumbed in cva4066ss Miele coffee...
Vandit
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™