martha stewart pre-lit christmas tree

santafegmDecember 1, 2008

Are Ladybard or GrannieB still out there??? It's been several years since they posted, but I'm having the same dilemma with my Martha Stewart pre-lit tree from K-Mart. My kids helped take down the tree and unplugged everything...now I can't get the lights to work. Of course, I can't locate my instruction booklet. Are the instructions still available? It would make this holiday season so much easier!!! Thank you to anyone who can help!

Thank you for reporting this comment. Undo
donnawb

Do you keep changing your name? Did you read the last thread because I had some suggestions but I don't have a MS. BTW have you went to KMart and looked how they are plugged in?

    Bookmark   December 1, 2008 at 11:55AM
Thank you for reporting this comment. Undo
jerail

I am having the same problems and was wondering if anyone had the instructions that they could email to me. Desperate in Alabama.....Thanks to anyone who can help, and Kmart has no suggestions.

    Bookmark   December 2, 2008 at 9:29PM
Thank you for reporting this comment. Undo
donnawb

Have you checked the fuse. You have to find the right plug. I would keep changing the plugs until you get it right. On the extension cord the opening is closed until you plug something in. When you get it figured out mark the plugs with a permanent marker.

Go to Kmart and see how they have the trees plugged in. You may see if they have instructions somewhere for the trees they put up.

    Bookmark   December 3, 2008 at 6:54PM
Thank you for reporting this comment. Undo
donnawb

Just found this. Hope it helps.

Here is a link that might be useful: tree instructions

    Bookmark   December 3, 2008 at 7:11PM
Thank you for reporting this comment. Undo
donnawb

Sorry that is the wrong link. It is to put up a non prelit.

    Bookmark   December 3, 2008 at 7:13PM
Thank you for reporting this comment. Undo
intukeanu_yahoo_com

I think someone copied & pasted my comment about Ladybard & GrannieB!!! I posted the original comment on another thread, but now I see it here under the name santafegm...not me!

Anyway, I ended up stringing lights on my tree this year. I tried every way in the world to connect the original lights on the tree, but nothing worked. If anyone has the instructions, I will definitely frame them on my wall for next year!!!

    Bookmark   December 4, 2008 at 8:15PM
Thank you for reporting this comment. Undo
drjinva

There's a box in the middle section of the tree that accomodates three plugs-- two on one side and one on the other. The cord from the box plugs into the wall. The box and all of my plugs had a piece of red tape on them. I'm thinking that I might have done that last year to make things easier though.

    Bookmark   December 7, 2008 at 9:37AM
Thank you for reporting this comment. Undo
lovesummer1

I just assembled my Martha Stewart tree. It's about four years old and a 7' "slim" tree, which comes in three parts. It could well be that the Martha Stewart badge goes on many different trees from different manufacturers, so I wouldn't be surprised if the connections were different from one tree to another, or one year to another. But in any case, my experience was similar to drjinva's. The wire that plugs into the wall ends in a socket like an extension cord, and accommodates three plugs. It has a little red tag hanging from it saying "please plug in here." There are three male cords, one from each tree section, that have little red tape dots on them. I plugged each of them into the socket. There's *also*, in the middle section, a male plug and a small female plug, neither of which had red dots. I plugged the male into the female, and now the whole tree lights. In previous years I've added an extension cord inside the tree (see my previous post) because the top section cord didn't seem to want to stretch to the socket, but this year I was able to get it all together. I'll still use the extension cord for the extra lights I add.

The box has a phone number on it for assistance: 1/800-813-0206, and it says to call between 8-5 eastern time. Again, though, it's several years old.

    Bookmark   December 7, 2008 at 1:08PM
Thank you for reporting this comment. Undo
Smarth

Can anyone tell me where the fusee are located and how to change? I have one small section that won't light on my tree.

    Bookmark   November 28, 2013 at 7:18PM
Thank you for reporting this comment. Undo
patty_cakes

The fuse/fuses should be in the plug itself. There's usually a part that will slide, but this might not be the case with the MS tree. If you can't do it, go back to,the store where you purchased the tree, and with the actual store display right in front of you, have someone show you. Good luck.

    Bookmark   November 29, 2013 at 6:46AM
Sign Up to comment
More Discussions
Valentine Decor
It was a little crazy decorating this year for Valentine's...
phonegirl
Nana, here are some sample uploads.
I thought I'd try to upload the same image saved in...
oldalgebra
After Christmas
Simple table. As a lot of you know, my son & 3...
yachter123
Winter decor gone, here's Valentines
Just changed out the items on my kitchen table. I really...
luvstocraft
Five Easy Vignette Tips
Link Here is a link that might be useful: Tips
yachter123
Sponsored Products
Vigo Bathroom Glass Vessel Sink in Rising Moon and Waterfall Faucet Set in
Home Depot
International Caravan Windsor Collection Carved Hardwood Exotic Palm Tree Wall T
Overstock.com
Harmony Yew Tree Oval : 5 Ft. 4 In. x 7 Ft. 8 In. Rug
$249.00 | Bellacor
Heirloom Tree Personalized Recipe Box & Card Set
$59.99 | zulily
Marcy Plate Tree - PT36
$49.98 | Hayneedle
Trees in Winter Ceramic Vase Table Lamp by The Natural Light
Lamps Plus
15751AZT Bronze 12.4 Watts Narrow Kichler LED Landscape Light
EnvironmentalLights.com
Campania International Tree Frogs Garden Statue - A-481 - NATURAL
$59.99 | Hayneedle
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™