Scratches to the CC stainless steel areas

Zany13May 3, 2012

I have another question to all of the CC owners.

I noticed a demo range from a local store, the cast iron grates all sit on top of the stainless steel surface of the burner. I removed one of these grates and there are deep scratches made by them on the SS.

I also noticed that the front plate of the range can be easily scratched as well from daily use. I think this is common for all SS ranges cause all of them have front SS surfaces on them.

Could these be buffed out?

Thank you for reporting this comment. Undo
alexrander

Yes, the light scratches can be buffed out. Usually with some fine steel wool in the same direction as the original finish. I would not worry about what's under the grate.

    Bookmark   May 4, 2012 at 12:57AM
Thank you for reporting this comment. Undo
billy_g

I bought a scratch repair kit from these folks and it works very well on stainless steel. It requires some work and you need to read the instructions and watch their videos first.

Billy

Here is a link that might be useful: Scratch-B-Gone

    Bookmark   May 4, 2012 at 12:22PM
Sign Up to comment
More Discussions
My GC thinks I need 1000 cfm and I think he's crazy
So I actually don't think he's crazy and he's right...
crl_
36" Rangetop & Wall Ovens vs. 48" Range
Our current kitchen plans call for a 36" rangetop...
greasetrap
Wolf oven error on self clean: TCO detect as open
I've had two Wolf E series for nearly 2 years (single...
repac
Best customer service for wall ovens?
I posted this comment to an older thread lamenting...
Mrs. Porchman
Need A New Keurig - Suggestions?
Our Keurig at the lake bit the dust. The single cup...
amck2
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™