Will this hood work with this range?

dancingqueengwMay 10, 2012

I am replacing an OTR microwave and the downdraft Jennair range below it. I am going with a Thermador Pro Harmony Dual fuel because it is and inch and a quarter less deep than the induction range I would have liked. The current range is a drop in and is angled between drawers and cabinets thus the clearance issues. I need 30 inches of clearance to the range hood so have selected the Kobe 30 inch under cabinet RA-038 which is only five inches high and 30 inches wide. It ranges from 330 CFM to 720 and the installer indicates that my current downdraft vent will create enough make up air to allow installation. This range hood is 20 and 1/2 inches deep so it will also allow for top cabinets to open. It is not a deep hood though. The only way I could have one of those would be to remove the cabinets above the range entirely. Do you think this will work? TIA.

Sign Up to comment
More Discussions
Bertazzoni 36" Dual Fuel or other range in price point?
There have been a lot of discussion about the Bertazzoni...
Buttons
Questions about noisy back draft damper on vent hood roof cap
One female here who is definitely not a diy type person....
texasgal47
NY - Long Island Kitcken Appliance (Berta/Electrolux/etc...)
Hi All... I've been lucking for the past 6 months while...
nyli2014
Island hood location/height
I've got a cooktop that's 20" X 37" that...
dickross
Jenn Air Counter Depth Refrigerator
Hi, We will probably be getting the Jenn Air counter...
C C
© 2015 Houzz Inc. Houzz® The new way to design your home™