Tub-mounted faucet isn't laying flush on tub

threeapplesMay 22, 2013

We have the Jacuzzi Mio and the plumber said I needed to install our Rohl tub filler and handles on the tub itself, not the tub deck. It's installed now and the fittings are not flush on the tub, there is space between them and the tub. I'm annoyed I didn't insist it was installed on the tub deck, but there isn't anything I can do about it now. The fittings are on the corner of the tub if that makes sense. Is it possible to have these flush with no space?

Thank you for reporting this comment. Undo

Here is a tub like yours with tub filler set installed. It's flush. Not sure why yours isn't - it should be:

    Bookmark   May 23, 2013 at 9:55AM
Thank you for reporting this comment. Undo

Perhaps the rough in with the valve was too high and when they installed the trim, it won't sit down.

    Bookmark   May 23, 2013 at 11:26AM
Sign Up to comment
More Discussions
Need bathroom sink/mirror/sconce advice asap!!
Hello everyone, we are in a total pickle over what...
Jenn Cassie
72 in vanity in a 77 inch space?
We have a small master bath that we are redoing. We...
Conflicting Contractors: how to anchor a shower niche shelf
Dear Bathroom Wizards, We put an 18-inch wide, extra-tall...
What is the strongest, best bathroom fan on the market?
We've had mildew in our old bathroom, despite having...
prairiemoon2 z6 MA
Trying to reconfigure master bath to include washer dryer
How does this layout look? how could I make this space...
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™