Will this toilet work with this washlet?

buildinvaMay 24, 2013

We are planning on the Inax Advanced Toilet Seat
R-series (Elongated) and would like to know if it will work with this toilet: American Standard Clean White 1.28 GPF High Efficiency WaterSense Elongated 2-Piece Toilet
Item #: 88575 : Model #: 2514.101.020

Here is the link for the washlet: http://www.inax-usa.com/products/seats/000128.html

And the toilet: http://www.lowes.com/ProductDisplay?partNumber=88575-834-2514.101.020&langId=-1&storeId=10151&productId=3306710&catalogId=10051&cmRelshp=req&rel=nofollow&cId=PDIO1

Also, does that choice of toilet look good? Or should I upgrade a bit? I considered this KOHLER Persuade White 1.6 GPF WaterSense Elongated Dual-Flush 2-Piece Toilet
Item #: 89230 : Model #: 3654-0

http://www.lowes.com/pd_89230-20602-3654-0_0__?productId=3173317

Thank you!!

Here is a link that might be useful: Inax Advanced Toilet Seat

Thank you for reporting this comment. Undo
herring_maven

buildinva, probably it will fit, in the broader sense of whether the bolt spacing is the same and there are sufficient support points on the toilet bowl to keep the seat from wobbling. The main issue would be the amount of clearance behind the bolt attachment points and in front of the toilet's tank: the Inax Luscence has its own tank for heated water in that area, and the toilet seat hinge, accommodating the seat's tank, might lack sufficient clearance to allow the seat to swing all the way up.

Aside from the mechanical issues, however, the Inax seat is squared off at the rear, where the AS toilet tapers in as it gets nearer the toilet tank. You are going to have an overhang on the sides at the rear of the sat that may clash with the lines of both the seat and the toilet.

A Toto Vespin II has similar styling to the AS toilet you linked, and (from personal experience) I can tell you that it works perfectly with an Inax toilet seat (ours is a Clessence, not a Luscence). Of course, the Toto is a bit pricier than the AS, and is not sold a Lowe's.

Here is a link that might be useful: One Vespin II installation

    Bookmark   May 24, 2013 at 6:53PM
Sign Up to comment
More Discussions
Vanities on opposite walls -- how much width?
Hey all. We are trying to design a long and narrow...
jenmendel23
Nervous about going curbless, need to decide this week. Issues, cons?
To be quite frank, we'd be doing this for looks only....
happyallison
Does anyone know where to sell a brand new vanity
looking to sell locally only and tried craigslist this...
matdrew
suggestions for double vanity between 2 walls
I'm looking for suggestions for a (or pictures of your)...
A McK
Has anyone seen an interior door handle like this in the States?
Sorry for the link but I couldn't find an image to...
ceezeecz
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™