Leaking rod holes in poured basement walls

plumbmanAugust 2, 2011

I have poured concrete basement walls and several of the tie rod holes are leaking.

I was wondering what is the best method of repairing this problem. So far I've heard of using plain hydraulic cement, and also water activated polyurethane.

Any suggestions would be appreciated !

Thank you for reporting this comment. Undo
worthy

There are a number of polymer modified fillers that can be used. These are the same materials that are used for concrete crack injection. (See link for example.) There are also swell plugs, a though I don't have experience with these.

In the old days, the formers used cork covered with asphalt. They worked fine too.

Look for a local concrete supply company for the most appropriate products, not the big boxes.

Here is a link that might be useful: Crack Injection

    Bookmark   August 2, 2011 at 6:51PM
Thank you for reporting this comment. Undo
bus_driver

A commercial roofing supply company probably would have the materials you need. NP1 by Sonolastic would be good. Best if applied on the outside.

    Bookmark   August 6, 2011 at 6:22PM
Sign Up to comment
More Discussions
Spray foam basement band joists
I just had an energy audit and one thing they recommended...
mkrafczyk
basement flooring - tile or finished concrete
we're planning a reno that will include expanding and...
lmgch
Which drywall to use in the basement?
Hi, I am finishing a basement that is under the attached...
Vesh
Str'l Wood Floor + CrwlSpace vs Concrete Slab
Hello, We were discussing our plans with a builder...
Naween
Ceiling insulation in basement
We are finishing our basement and I am getting to the...
mirandajae
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™