finding parts for an antique lamp

sighMarch 27, 2008

It's a floor lamp, torchier, what have you. I need to find updated replacement wiring along with the big, 4" long ceramic bulb socket (though I do have the original, still attached to the original wiring).

The most difficult part is going to be replacing one of the columns/lamp stops. It's cast metal, looks bronze but is that nodescript pot metal on the inside. There were two on the lamp, one of which crumbled to dust.

Does anyone have any suggestions for good places to look for lamp parts? This thing is 60 years old & I'd really like to rehab it & put it into use.

Thanks very much,

Nina

Thank you for reporting this comment. Undo
lindac

You're in luck! I was doing some research on an old lamp for a friend and found this site.
Linda C

Here is a link that might be useful: Antique lamp parts

    Bookmark   March 27, 2008 at 11:00AM
Thank you for reporting this comment. Undo
clink

Another place that I have used with great success is Hippo Hardware in Portland Oregon.

There is a great guy from Iowa there -- Cedar Falls area -- who has helped me thru tons of lamp repairs. They also carry a large selection of fabric covered cords for replacement.

Cathy

    Bookmark   March 28, 2008 at 8:17AM
Thank you for reporting this comment. Undo
golelen

You might put up a note on the ebay 'I want it now' page or put an ad out on craigslist

Here is a link that might be useful: Antique Floor Lamp Blog

    Bookmark   March 17, 2009 at 11:10PM
Thank you for reporting this comment. Undo
markmizzou

Here's another website of a lamp parts supplier out of New York City. I have used them to buy parts for fixtures when all I had were two antique globes. Their prices are reasonable as you will see. Good luck maybe they will have what you need "www.grandbrass.com";

    Bookmark   March 18, 2009 at 9:28PM
Thank you for reporting this comment. Undo
covondonga

You can have any antique metal lamp part made at
www.castmetalparts.com
They are a small foundry that does not mind little jobs!
greta prices too!!!

Here is a link that might be useful: That parts Site

    Bookmark   July 21, 2009 at 11:40AM
Thank you for reporting this comment. Undo
gstalnak_juno_com

Hello, I am looking for a floor lamp glass "break", H4" x 4" diameter. Cone shaped with a normal lamp tubing hole at the top. Anybody got any ideas?

    Bookmark   February 12, 2011 at 12:10PM
Sign Up to comment
More Discussions
camelback sofa
Hello there - could anyone help me to identify the...
jerome_shorter
Need Help to ID Native American Jewelry Bracelet
I picked this up at local garage sale and thought it...
devincu
help identifying antique table
I found this table at an estate sale for 45 dollars....
moya0311
Japanese Vase
I just got this vase at street sale would like to know...
Dones
Antique Bell evaluation
Hi, I have this antique bell. Can anyone tell me what...
Shay Yakobi
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™