Help in indentifying Hasting Tyden-locked table

bodiddleyFebruary 15, 2012

I have three estate pieces from my late father-in-law which we aren't quite sure about valuation or full descriptions of the pieces. I noticed a similar post in the forum, and thought maybe I'd try.

Below are some images of the table... assuming it's oak. Hastings Tyden-Locked tag. Certainly coudl use refinishing, I believe one of the leaves is original (Seems to fit) the others, some are VERY worn, and may not even be original.

The four chairs have the "Standard Furniture Company" tags. AGain, refinishing needed, tightening, one slat has come out of one chair.

Any thoughts appreciated!!!

Thank you for reporting this comment. Undo
chibimimi

If the profile on the edges of the rough leaves match the edge profile on the table, it's possible that they are original and were stored somewhere less than optimal. Or the table and one leaf could have been refinished and the PO didn't bother with the other leaves, if they were never used.

    Bookmark   February 15, 2012 at 8:01PM
Thank you for reporting this comment. Undo
lindac

It's a round oak table.....with leaves. The slide mechanism is Hastings.....the chairs were sold by the Standard Furniture Co....not necessarily made by them. So many companies made tables like that, that unless it's Haywood WakefiEld or another well known maker....it doesn't matter.
The leaves may or may not match the table...I have been to a bunch of auctions where they sold stray table leaves....I bought a few to put in my round oak table...to use with a cloth.
It's a particularly nice table because it has a spliT pedestal, which makes for a sturdier table. Mine rocks like a boat in a storm with leaves in it!
I would figure out which leaves match best and refinish all....
Then look for more chairs. I know the bottom has dropped out of the golden oak market, but that's a great set! Strong sturdy, useful....and classic.

    Bookmark   February 16, 2012 at 12:42AM
Thank you for reporting this comment. Undo
rendrag254

I have a very similar table my grandma said her uncle/godfather John Geimer made it for her as a wedding present. The top, mechanism/sliders & lock looks the same but our pedestal is round not diamond shaped and has a more ornate turning to it our legs are also fancier & have caster. we only have a tyden lock tag on our lock not a big Hastings label like yours. Ours has five original leaves that look like yours but have metal peggy things to fit the leaves together were your's look like wooden pegs & ours are in better shape finish wise. we even still have a chair like yours but no tags on it & ours has had that leathery wood/cardboardy seat replaced years ago. Grandma had 12 chairs to start with as the table seats 12 with all 5 leaves but no matter how hard grandpa & dad tried the others died years ago but I remember the original seats from when I was really little & dad redid some with pad covered plywood because someone tried to stand on 1 & their foot went through that leathery composite stuff. I think my cousin might still have 6 of them in ok shape. We live in Rochester, NY (upstate)along lake Ontario. John Geimer was a local politician, furnature maker, & dog breeder. So you might have an original John Geimer

    Bookmark   November 26, 2012 at 6:01PM
Thank you for reporting this comment. Undo
sheilajoyce_gw

My grandmother had a table like that. As a bride in the early 1900s, she lived in many parsonages in southern Illinois. They did not have their own house till the late '20s perhaps. No telling when they bought that table.

    Bookmark   November 27, 2012 at 7:57PM
Thank you for reporting this comment. Undo
bobklein

just found this and although it is a very late posting it might be helpful to someone.

the tyden locking system is complete except you are missing two of the wooden slides on each side. without those slides it will not work correctly. Generally there would have been 5 leaves. All would fit and would probably be numbered on the long edge where the pins are located. These tables would open and up to three leaves could be inserted without opening the pedestal. With the last two leaves inserted the pedestal must be opened.

hope this is helpful to someone.

    Bookmark   November 6, 2014 at 11:46AM
Thank you for reporting this comment. Undo
jemdandy

When I was a child (1940s) our family had a table similar to yours except the pedestal did not split; The top slid open to accept 1 to 2 leaves. Our table had a very dark finish.

I notice that the legs do not match the pedestal in color and appearance. These look like pieces from 2 different tables.

By the way, our family found this table style was very useful. Its main drawback was the feet. People, especially children, tended to rest their feet on those and roughed the finish. Also, if the chairs were not placed at particular locations around the table, the table feet interferred with people's feet. Expect high scuffing on the feet of this style if the table has been well used.

    Bookmark   November 9, 2014 at 2:29AM
Sign Up to comment
More Discussions
Three crown stamp on fork: Swedish or U.S.?
Any idea on the age or authenticity of this brass fork...
bradleyd_svh
Need Help to ID Native American Jewelry Bracelet
I picked this up at local garage sale and thought it...
devincu
Help identifying Bowl
I have had this Bowl for some time, i can't seem to...
Dones
Wanted: Blue Bonnet Margarine Vintage Dolls
I've been collecting the Blue Bonnet Margarine promotional...
beckame
Need history of "Lister Woodcraft"
Trying to determine if this wooden candlestick is really...
bradleyd_svh
People viewed this after searching for:
© 2015 Houzz Inc. Houzz® The new way to design your home™